Slider Driven Auger

As the lab builds out it's Clay 3D printing work, it became necessary to prototpye a driver controll system.

This project uses a few distinct components to control a auger that can be mounted on a robot.

Basic Components:

1. Prusa Extrauder with exposed control and fan plug
2. Polulu Tic Microcontroller 36v4
3. Two Sets of Jumper Wires
4. Potentiometer Slider
5. Power Supply with Barrell Jack adapter

Basic Set up

This photo contains the visual of the above components:

These Photos show the somewhat primititve testing wiring harnesses:

This is our wiring guide:

Computer [Converted] copy no pictures.pdf